Some tips to make handmade kitchen furniture?
Certainly it’s not difficult to buy the furniture you need at the shop. But very often such purchase can be expensive. That’s why many prefer to do furniture themselves. Handmade furniture needs only a ser of tools, material and some knowledge combined with fantasy, art and skillful hands. So, this article will teach you how to make a serving table, a stool and an under sink cupboard.
Serving Table
You’ll need 40X20mm whetstones, furniture shield, 120X15 plank, paint and bars 18-20 mm in diameter. And certainly provide yourself with tape measure, setsquare and hacksaw.
Mark the detail contours on the whetstones and saw them up at length. Cut the tires on the detail 2 and 4. Hollow out the slots on the details 1 and 3. Mark the detail 7 and cut it. Make the holes 18-20mm in diameter on the details 1 and 3.
Make the table framework. Define the necessary sizes of plates 5 and mark them. Cut the plates and take off the faces. Putty the edges. Grind the rest of table details. Paint the top surface of the plates into the chosen color. Make the framework with the help of glue and place the plates with the help of screws.
Your table is ready!
Under sink cupboard
You’ll need plates for side walls, rings and doors. The floor will be the bottom of the cupboard and the cover will be the sink itself.
The sizes depend on sink type and its above-floor level. The front ring is placed under the sink eave and the second one is put on the floor level. The cuts and holes are mode against the location of water pipes and blackest. Against your materials and thoughts one can make table-cupboard the cover of which will set the sink from this or that side. The cover is fastened on the walls with the help of tires.
Stool
The legs height is usually 450 mm. The legs are made from the 35×35 mm whetstones with the narrow bottom parts up to 20×20 mm.
To make them rigid they are fastened with the help of rings at the top part and with pseudo legs at the middle one. Then they are united with the help of blind glued tires.
The seats are usually made on the inserted tires which are pasted in the legs. As a rule they are faced with lead and plastic.