US passengers arrested in Amsterdam
Dutch airport police said that the men were arrested at Schiphol airport on Monday morning “at the request of the judicial police,” but did not elaborate.
ABC News said the men boarded United Airlines 908 flight from Chicago to Amsterdam despite a number of security concerns, beginning in Birmingham, Alabama, where Soofi appeared to have started his journey.
Security staff at Chicago’s O’Hare airport reportedly stopped him because of his “bulky clothing”, and uncovered $7,000 in cash, before opening his luggage.
 |
| The men were travelling on United Airlines Flight 908 from Chicago O’Hare to Amsterdam Schiphol [EPA] |
The US homeland security department said in a statement it had informed Dutch authorities that two men flying to Amsterdam had packed “suspicious items” in their luggage.
But it said that the ”items were not deemed to be dangerous in and of themselves”, adding the matter was still under investigation.
A US law-enforcement official said the men did not have banned items in their carry-on luggage and that federal air marshals were on the flight.
Michael Barrett, a security and risk management expert and former strategy director of the White House’s National Security Council, told Al Jazeera that the arrests were “an extremely serious discovery”.
“What it shows is that there’s a continued interest in aviation as the location of a threat for terrorist strikes. But what’s really important here is this actually shows a strike emanating from the US,” he said.
“It does appear that this potentially is a dry-run - a test attempt to see how the security system works. The good news is obviously that the security system worked and found them; the bad news is potentially there can be many more attempts just like this.
“These kinds of plots that actually originate within the US are much harder to find. We in the US have a very strict system by which we monitor the interactions of law enforcement with the general public and we’re going to have to take a look at whether or not that’s still going to keep us safe.”
Conflicting reports
In the hours that followed the arrests in Amsterdam, there were conflicting theories about whether the episode was a misunderstanding or a genuine threat.
Several US media sources reported that Soofi, after commencing his journey in Birmingham, checked his luggage on a flight bound from Chicago for Yemen, with scheduled stops in both Washington’s Dulles airport and Dubai.
Reports said the pair then boarded a flight to Amsterdam, and when officials at Washington’s Dulles airport realised that Soofi was not on the same flight as his bag, they recalled the flight and removed the luggage.
But the New York Times said Soofi checked his bag onto a Yemen-bound flight from Birmingham, parting ways with his luggage in Alabama rather than Illinois.
Amid limited details about the incident, there were suggestions that it could turn out to be have been an unusual but harmless misunderstanding.
Dinning Room Oak Chair Styles: Set of 4 Oak Finish Windsor Country Style Wood Dining Chairs
Oak wood helps to protect the individual from the negative influences, it compensates the shortage of energy in the human body. This tree cleans the karma, enhances activity, eliminates stagnant phenomenon. Medicine consider that oak is especially beneficial for the livers and cardiovascular system.
The oak solidity is considered to be the best in furniture manufacture. However, oak high strength and hardness increases the labor intensity. As far as furniture manufacturing is concerned only two hundred years old trees are suitable. only trees over two hundred years. Industrial stocks of high quality oak wood are very limited and each year they become ever smaller. Therefore, many furniture companies do not risk the production of furniture from oak, preferring it to cheaper and affordable wood - beech, birch, pine, etc.
Oak is undoubtedly considered the best in furniture manufacture. Profitable oak furniture production advantage is its resistance to a wet environment. This is especially important if the furniture is placed in the kitchen or in a humid climate.
Oak still provides one of the most beautiful furniture designs. The colors vary from light to yellowish brown, dark and even white. Moreover dinning room oak chair styles make one’s interior rich and noble.
Windsor famous set of 4 Oak Finish Country Style Dining Chairs are very popular among oak furniture lovers. It entirely completes one’s dinning room décor and matches one’s table with new country style. These dinning room oak chair styles provide high quality wood and don’t need any complicated wash care. The chairs come in set of 4; have beautiful natural oak color and 36H dimensions.
Some facts about modern kitchen furniture
Everything depens on kitchen furniture: food cooking, dinners and lunches, guests mods and so on. Modern kitchen furniture is also considered to be as a dinning room.
All these facts tell that it’s a responsible topic to choose the furniture for the kitchen. The modern kitchen furniture market presents 3 groups of furniture: supermodern, classic and modernized one. Many buyers prefer to get traditional furniture made of natural materials. But there arе such kitchens that recall new Ferrari, they are orange like an orange. Such colors promote appetite and stimulate. But they can also tire at the same time.
Mayor tendencies are bright kitchens today. High-tech is also very popular nowadays. Modern kitchen furniture made of glass and metal is the most demanded now.
There are some price categories of the kitchen furniture: “econom” (250-300 euro for a linear meter), “business” (350-500 euro for a linear meter) and “de luxe” (100 dollars for a liner meter). The price depends on façade, manufacturing country and material.
The furniture cost also depends on technical filling – numerous technical frills that make the kitchen comfortable for a person and allows economizing time while looking for this or that thing. These helpers include various cabinets, containers, box delimiters, ironing boards, trays, etc.
Kitchen planning choice depends on the area and shape of the room. Most often is line and angular furniture placing is used. The most popular is square shape.
You can also use designer service that will show you some 2 or 3 variants of planning. But if you purchasing in Ikea you won’t solve this problem yourself. There you’ll get a special subsidiary material - paper furniture which you can move and combine together until you’ll get the appropriate variant of planning.
That brief information is the most important details you should know designing your kitchen furniture. All that advice is necessary. But remember to follow your wishes and desires. The main kitchen furniture feature is to make your life comfortable and happy. Listen to the designers and then think what personally you want to do and what kitchen you want to have!
Some tips to make handmade kitchen furniture?
Certainly it’s not difficult to buy the furniture you need at the shop. But very often such purchase can be expensive. That’s why many prefer to do furniture themselves. Handmade furniture needs only a ser of tools, material and some knowledge combined with fantasy, art and skillful hands. So, this article will teach you how to make a serving table, a stool and an under sink cupboard.
Serving Table
You’ll need 40X20mm whetstones, furniture shield, 120X15 plank, paint and bars 18-20 mm in diameter. And certainly provide yourself with tape measure, setsquare and hacksaw.
Mark the detail contours on the whetstones and saw them up at length. Cut the tires on the detail 2 and 4. Hollow out the slots on the details 1 and 3. Mark the detail 7 and cut it. Make the holes 18-20mm in diameter on the details 1 and 3.
Make the table framework. Define the necessary sizes of plates 5 and mark them. Cut the plates and take off the faces. Putty the edges. Grind the rest of table details. Paint the top surface of the plates into the chosen color. Make the framework with the help of glue and place the plates with the help of screws.
Your table is ready!
Under sink cupboard
You’ll need plates for side walls, rings and doors. The floor will be the bottom of the cupboard and the cover will be the sink itself.
The sizes depend on sink type and its above-floor level. The front ring is placed under the sink eave and the second one is put on the floor level. The cuts and holes are mode against the location of water pipes and blackest. Against your materials and thoughts one can make table-cupboard the cover of which will set the sink from this or that side. The cover is fastened on the walls with the help of tires.
Stool
The legs height is usually 450 mm. The legs are made from the 35×35 mm whetstones with the narrow bottom parts up to 20×20 mm.
To make them rigid they are fastened with the help of rings at the top part and with pseudo legs at the middle one. Then they are united with the help of blind glued tires.
The seats are usually made on the inserted tires which are pasted in the legs. As a rule they are faced with lead and plastic.
Some secrets about how to buy an office chair?
While buying an office chair one should remember that he not only buys a furniture unit to seat but a thing to improve his health. And if anybody doesn’t know how to buy an office chair and purchases it without any help he can later suffer from spine diseases.
Here are some minimal office chair demands while buying:
- Plastic armrests and pentactinal support with revolving castors;
- The ability to change seat height with the help of one hand and without a need to stand up;
- All the regulations should be easy and pleasant – thus you’ll accustom yourself to adapt your chair to your figure;
- Shock absorber that can regulate load change on spine while lowering the seat;
- Ergonomic back shape (the roller under the waist);
- a thick elastic foam rubber layer to fix vertical position;
- Safe seat and back (compact material, natural leather, special breathing furniture material).
Some practical recommendations (from the customers’ experience) that will easily answer your question “how to buy an office chair?”:
- A castor, easily rolling on the floor and fleecy surface, is an obligatory office chair demand.
The necessity of armrest depends on how much work should the person do with PC keyboard (thus he needs elbow support) and on how often he should leave his working place (one needs to lean on the chair while standing up and sitting down). One should buy a chair without armrests only if there is no place in office.
- Directors that often huddle in their office need the office chair with rocker mode. And those who work hard sitting permanently in front of a computer need an office chair with ergonomic synchronic mechanism “1:3” that can adapt the chair ideally to any figure and any type of work.
- Rocking decentralization: rocking axis in rocker mechanism should be taken forward from the chair center, thus while rocking your legs (knees) won’t lift up.
- Customers chairs and office chairs should have low back, as narrow as they can be supported with legs or elastic frame. Office chairs on the rocking support will be good only for those customers that got accustomed to office chairs (otherwise your visitor will always rock on the chair and divert you from the conversation).
- Staff office chairs should support only their shoulders and backs (a sleep during the working time is a big temptation for the staff). But directors can have a special chair with headrest support.